Fashionable and bright owl case made of soft and dense felt will protect your smartphone from damage. But, most importantly, to sew such a cover with your own hands is very simple and quick.
You will need:
• felt 2 mm thick yellow, light orange;
• felt 1 mm thick of the color of green grass;
• felt flower of orange color with a diameter of 3 cm
• yellow wooden bead with a diameter of 4 mm
• orange and black cotton threads of 20 cm in diameter of 1 mm
Besides:
• scissors for fabric;
• pencil;
• tape measure;
• hole punch mites;
• transparent glue;
• sewing machine;
• a hand needle and matching thread for sewing.
DIY tablet case
Step 1
From a light orange felt, cut a strip of approx. 26 x 9 cm (preferably pre-measure the phone). Fold the strip across in half and chop it with tailor pins. Sew the sides by stitching on the sewing machine at a distance of 3 mm from the edge.
Step 2
From the felt of the corresponding colors, cut out the eyes, beak and wings. For eyes, stick the yellow circles onto the green circles. Glue a piece of black cotton thread as a century to one eye. On the second eye, punch 4 holes with punching pliers, cross the black cotton thread through them crosswise and tie it to a knot on the back.On the wings with a white acrylic paint, use a foam brush to draw strips. Place eyes, beak and wings on cover and stick. Glue a small wooden bead in the middle of the felt flower, glue the flower to the wing. At the top edge of the cover in the middle of the hole with punching pliers, punch a hole and alternately thread two orange cotton threads into it, doubled each and stretched both ends through the loop.
Source and photo: Burda. My favorite hobby is 3/2018
