Children's insulated vest

It is pleasant to pamper your favorite child with a bright, warm, cozy new thing, hand-sewn.

For sewing a children's insulated vest you will need: raincoat fabric, insulation (synthetic winterizer, tinsulate, etc.), fleece, zipper, linen and edging.

The details of the top (raincoat fabric and insulation) are cut with increments on the sides and middle of 3-4 cm (in general, 6-8 cm). Under the liner, measure the necessary length with the linen rubber and quilting the details of the top, stretching the elastic. We connect separately the details of the top and the lining. At the top we cut off the insulation allowances up to 2-3 mm.





We manually connect the seam of the top collar and the lining from the shoulder to the shoulder seam. Recommend fasten the hood in the same way.

We fasten with tailor's pins (buy at the Burda store) the top and lining on all sides (hood, side seams, bottom, armholes) inside out.


Stitch it all around the edge. We take a fringing elastic band, measure the armholes and the circumference of the waistcoat hood-side-bottom-side, we sew the elastic into rings.

We sweep the elastic band with the matte side up, folding it along the halves, we sweep the zipper.


At the corners we add as in the photo:

Build it all up on a typewriter


Done!
In the same way, you can sew a jacket by adding sleeves.