DIY backpack decor

Want to turn a regular backpack into an original one? Choose whichever you prefer - with rhinestone motifs, floral design or chic applique ...

Source version
It is from this backpack with the help of our ideas, instructions and motives that you will make a "candy"!


For mus fans
Do you like hit rhythms? Show your passion for everyone!

YOU WILL NEED: a backpack, rags of black and white fabrics, non-woven fabric H 250, black cord, silver wire, silver aluminum sheet, thread for buttonhole stitching in black and white.
PREPARATION: copy motives from the following photos. Transfer each numbered part separately to tissue paper. Cut parts 6, 7 and 8.
On the seamy side of the fabric flaps, iron the gasket.
Cut out from white fabric: details 1, 2, 6, 7, 8 and 10. From black fabric details 3, 4, 5 and 9. From tin cut 2 parts No. 11.
Bend the wire along the lines of parts 12 and 13.
SEWING AND ASSEMBLING: fold the details of the motives, stitch them at a distance of 3 mm from the sections with contrasting threads for sewing loops, the stitch length is 3 mm. When sewing parts 4/5 and 1, grab the wire of motif 12. To grab the ends of motive 13, when sewing motifs 7/8.
Place the finished motif on the backpack and sew the needle forward with hand stitches. Parts made of tin on a soft litter are punctured repeatedly with a knitting needle.Apply details to motive 1 and sew on. Lay one end of the cord under motif 10 and sew, the other end to lay inside the front pocket of the backpack.
Copy the motifs of the applique and reduce or enlarge it to the desired size.
A B C D






For romantics
Such a backpack will not allow you to part with the sunny summer ...

YOU NEED: a light backpack, a patch of plain fabric, size. 35 x 60 cm, non-woven H 250, paints of different colors for painting silk, threads for sewing.
CUT TO: Cut out 2 pieces of a bow 32 cm wide and 21 cm long (including allowances). Cut out a strip for the jumper bow 9 cm wide and 12 cm long (including allowances).
Iron the gasket on the wrong side of the cut parts.

HOW TO MAKE: stitch the bow details face to face, leave a 5 cm long inversion hole in the seam. Cut the allowances at the corners obliquely, turn the bow out, iron the edges. Sew the hole in the seam.
Fold the jumper lengthwise in half with the front side inwards. Grind long sections, seam width 1 cm. Unscrew the strip and iron it.
Moisten the bow before painting. Draw a little paint on the brush, the edges of areas painted with different colors should flow smoothly into each other (first try to paint the fabric on an unnecessary flap). After drawing a flower, let the paint dry slightly, then in the center, apply a clear point, which should also blur a little. Allow the paint to dry completely, and then paint the back of the bow in green or any other color. The paint is also allowed to dry.
The jumper for the bow is also painted. Color the backpack.Lay the bow in the middle with folds, fix them with several stitches. Lay the strip around the middle of the bow, sew the ends together on the inside. Sew a bow to the front of the backpack.
Tip: You can not paint the fabric, but pick it up to the color of the backpack.

For glamor
Even on a weekday, Swarovski crystals will look great!

YOU WILL NEED: a backpack, sewing threads, crystals from Swarovski of different sizes and shapes.
HOW TO MAKE: as shown in the photo, make up different motifs from crystals and wash them randomly on a backpack.